Hazardous Materials in Calgary Commercial Spaces: A Guide for Tenant Improvements

Tenant improvements keep Calgary’s offices, shops and restaurants up to date. A new tenant moves in, walls come down, ceilings are opened and floors are replaced. In older commercial buildings, that demolition can disturb asbestos, mold or lead paint that has been sitting quietly for decades. Handling these materials properly keeps workers and occupants safe and keeps the project on schedule.

This guide is written for property managers, landlords, tenants and general contractors planning commercial renovations.

Where hazardous materials hide in commercial buildings

Commercial buildings from before 1990 commonly contain asbestos in:

  • Ceiling tiles and the adhesives or textures above them
  • Vinyl floor tiles, sheet flooring and mastic
  • Drywall joint compound and plaster
  • Pipe, boiler and duct insulation in mechanical spaces
  • Fireproofing sprayed onto structural steel
  • Exterior cladding and some roofing materials

Lead paint can be present on older structural steel, doors, frames and walls. Mold often appears where roofs have leaked, around rooftop units, in washrooms and kitchens, and behind finishes in below-grade spaces.

Who is responsible?

Responsibilities depend on the lease and the project, but in general:

  • Building owners and property managers should know what hazardous materials exist in the building. Many keep an asbestos inventory or survey.
  • Employers and prime contractors in Alberta are expected under occupational health and safety rules to identify hazards like asbestos before work that could disturb them. Our article on Alberta asbestos laws for contractors explains this in more detail.
  • Tenants should ask for survey information before signing off on a design that involves demolition.

Build hazardous materials into the project plan

  1. Review existing surveys. If the building has an asbestos inventory, check it covers the areas being renovated.
  2. Sample what is missing. Test materials in the renovation area that have not been sampled.
  3. Scope the abatement. Use results to define exactly what must be removed before demolition.
  4. Schedule abatement before other trades. Abatement needs its own window with the area contained.
  5. Clear and document. Independent clearance testing confirms the area is safe before the general contractor takes over.

Keeping the building open during work

Many tenant improvements happen while neighbouring units stay open. Good abatement planning includes:

  • Sealed containment with negative air pressure so contamination stays in the work area
  • Isolating or sealing shared HVAC systems serving the space
  • Planning waste removal routes and times that avoid busy areas
  • Clear signage and communication with building management and neighbouring tenants
  • After-hours or weekend work where it reduces disruption

Restaurants and food service spaces

Restaurant renovations often involve grease, moisture and plumbing changes, which can reveal mold behind walls and under flooring. Older kitchens may also have asbestos-containing floor tiles under newer finishes. Plan testing early, since food-service build-outs often run on tight opening dates.

Why early testing saves money

Discovering asbestos after demolition starts can stop work on site, require cleanup of contaminated areas and push back opening dates. Testing during design costs far less and lets you compare quotes on a clear scope.

Commercial abatement services in Calgary

Wise Abatement works with property managers, contractors and business owners across Calgary on commercial asbestos removal, commercial lead paint removal and mold removal. We hold a Certificate of Recognition (COR) for workplace safety and arrange independent clearance testing on completed work.

To plan hazardous materials work for your next tenant improvement, contact Wise Abatement or call (587) 997-6500.